Your Brakes Are Not Something to Put Off
Brakes wear out a little every time you stop, and South Florida traffic means a lot of stopping. Most brake problems start small, like a squeal from the wear indicator, and get expensive when they're ignored. Pads that wear down to metal start chewing up the rotors, turning a pad job into pads, rotors and sometimes calipers.
At Big Al Complete Automotive Repair we inspect the whole system: pads, rotors, calipers, hoses, lines and fluid. You'll know exactly what's worn, how much life is left and what it costs before we start.

Warning Signs of Brake Problems
Brake Pad Replacement in Coral Springs
Brake pads are the part of your brakes designed to wear out. Every stop turns a little of the pad material into dust. When the pads get thin, they take longer to stop the car, squeal from the wear indicator and eventually wear down to the metal backing plate.
When we replace brake pads, we also clean and lubricate the slide pins and install new hardware clips where needed. That's what keeps new brakes quiet and wearing evenly. Skipping those steps is why some brake jobs squeak a week later.
Brake Rotor Replacement
Rotors are the metal discs your pads squeeze against. They wear thinner over time and can develop grooves, hot spots or uneven thickness that you feel as a pulsing pedal or shaking steering wheel. We measure rotor thickness against the minimum spec stamped on the rotor and tell you honestly whether they can stay, can be resurfaced or need replacing.
Brakes Grinding When Stopping?
Grinding is the sound of metal on metal. Usually the pad material is gone and the steel backing plate is cutting into the rotor. Every mile you drive like that makes the repair more expensive, and your car takes longer to stop.
Grinding at low speed can also come from a rock or debris caught between the rotor and the dust shield, or from rust on the rotors after the car sits, which usually goes away after a few stops. If it doesn't go away, bring it in.
Brakes Squeaking After New Pads and Rotors?
New brakes can make some noise for the first few dozen stops while the pads bed in. Constant squeaking after that usually points to missing or worn hardware, dry slide pins, glazed pads or the wrong pad compound for your car. We fix the cause, not just spray something on it.
Brake Repair Open Now: When It Can’t Wait
A soft or sinking pedal, the brake warning light, a pull to one side or fluid leaking near a wheel are safety problems. Big Al is listed as open 24 hours, so call (786) 314-0305 and we'll tell you whether to drive it in or not.
Our Brake Services in Coral Springs
Brake Pads
Quality replacement pads installed with the hardware they need so they stay quiet.
Rotors
Warped or worn rotors replaced or resurfaced to stop pulsing and vibration.
Calipers
Sticking or leaking calipers replaced so your car stops straight.
Brake Fluid Flush
Old fluid absorbs moisture. Fresh fluid restores a firm pedal and protects the system.
Brake Lines & Hoses
Leaking or rusted lines repaired before they fail.
ABS Diagnosis
ABS light on? We read the codes and test the sensors and module.
Brake Warning Signs and What They Mean
| Sound or feeling | Likely cause | What to do |
|---|---|---|
| High-pitched squeal | Pad wear indicator | Book a brake check soon |
| Grinding or scraping | Pads worn to metal | Stop driving if possible, call us |
| Pulsing pedal / shaking wheel | Worn or uneven rotors | Rotor service or replacement |
| Soft or sinking pedal | Air, leak or master cylinder | Safety issue, call right away |
| Pulls to one side | Sticking caliper or collapsed hose | Inspect calipers and hoses |
| Burning smell after driving | Dragging caliper or parking brake | Have it checked before next drive |
Brakes are a safety system. When in doubt, have them inspected.
Why Do My Brakes Squeal?
Many brake pads have a small metal tab called a wear indicator. When the pad gets thin, the tab touches the rotor and squeals to warn you. That's your cheap warning. If the squeal turns into grinding, the pad material is gone and metal is cutting into the rotor. Get it in as soon as you can.
Shaking When You Brake?
A shaking steering wheel or pulsing pedal usually means the rotors are worn unevenly. Heavy braking on hot days and coming down off the highway at speed are common causes. New or resurfaced rotors with new pads fix it, and we'll check the calipers and hardware so it doesn't come right back.
How Much Does Brake Repair Cost in Coral Springs?
Brake repair cost depends on what's worn and what car you drive. Pads only is the least expensive job. Pads and rotors costs more, and calipers, hoses or ABS parts add to it. Trucks, SUVs and performance cars usually cost more than compact cars because the parts are bigger.
The cheapest brake job is the one you do on time, before worn pads damage the rotors. And if another shop has already given you a written brake quote, bring it in. We'll beat it by 20%.
Our Brake Repair Process
Call or Stop By
Call (786) 314-0305 or come to 11560 Wiles Rd. We're listed as open 24 hours.
Inspect & Diagnose
We inspect your car and find the real cause of the brakes problem, not a guess.
Price Up Front
You get a clear price before work starts. Have another quote? We beat it by 20%.
Repair & Road Test
We do the work, road test the car and explain what we did.
Back on the Road
You drive away. Our reviewers keep saying the same thing: in and out fast.
Why Choose Big Al for Brake Repair
Big Al Complete Automotive Repair is a Black-owned, 5.0-star auto repair shop in Coral Springs. Here's what you get when you bring your car to us for brake repair:
Brake Repair FAQs
How often do brakes need to be replaced?
Brake pads commonly last anywhere from 25,000 to 70,000 miles depending on the car, the pads and how you drive. Lots of stop-and-go city driving wears them faster. We'll measure what's left and tell you honestly.
Do I need new rotors every time I replace pads?
Not always. If the rotors are smooth and thick enough, they can stay. If they're scored, warped or below minimum thickness, they need replacing. We'll show you.
Is it safe to drive with grinding brakes?
It's not a good idea. Grinding usually means metal-on-metal contact, which reduces stopping power and damages rotors quickly. Call (786) 314-0305 and bring it in.
What does a soft brake pedal mean?
Air or moisture in the fluid, a leak, or a failing master cylinder. A soft pedal is a safety problem, so have it checked right away.
How often should brake fluid be changed?
Many manufacturers recommend every 2 to 3 years. Brake fluid absorbs moisture, especially in humid Florida air, which lowers its boiling point.
How long does brake pad replacement take?
A pad replacement on one axle is often done the same day, usually in a couple of hours or less. Pads and rotors on both axles takes longer.
Should I replace front and rear brakes at the same time?
Not necessarily. Front brakes usually wear faster. We measure all four and replace what's actually worn.
Will you beat another shop's brake repair quote?
Yes. Bring a written estimate from a licensed repair shop for the same brake repair job with comparable parts, and we'll beat it by 20%.
Brake Repair Near Coral Springs
Our shop is on Wiles Rd just east of Coral Ridge Dr in Coral Springs. Drivers bring their cars to us for brake repair from Parkland, Coconut Creek, Margate, Tamarac, Sunrise, Deerfield Beach, Pompano Beach and Boca Raton.

